17816673(16671505)-904 MIL-TEC Case for MIL-TEC Mt-Plus Coyote Helmet Код товара: 163-198-4588

So that the helmet does not shine in the sun and does not betray the soldier to the enemy with its smooth shape, a special cover was invented (it is also a cover). For its tailoring, modern materials with high strength characteristics are used, which are able to protect the helmet from scratches, rain, ultraviolet radiation and other environmental factors.
On this page of the sherif.ua online store, we present you a helmet cover made in light brown color. Trademark: Sturm Mil-Tec/Deutschland. Original title: US HELMTARNBEZUG FRITZ MT-PLUS COYOTE.

SpecialMIL-TEC MT-PLUS helmet cover details

Suitable for Fritz helmet. So unofficially called American PASGT helmet, the design of which very similar to the German model M1940. It was in service with the US Army from the late 70s to 2003.
The cover for a military helmet weighs about 108 g. Its base is a mixture of polyester fiber and cotton (65% x 35% respectively). The fabric is made using the Rip-Stop technology, according to which synthetic and natural fibers are intertwined, forming a square.adratiki (as on a chessboard). Such composition and design ensure the resistance of the product to friction and tearing. The cover will last more than one year, keeping its shape and not fading.
Its fixation on the helmet (so as not to slip off) is carried out by tightening the cord, which is stretched along the lower part of the entire circumference. The length of the lace is adjustable with a stopper.

The frontal part, where the night vision device is attached, is reinforced. On the sides of the cover there are Velcro strips - for insignia. Immediately behind them you can see the fasteners from the sling, allowing you to fixlace ballistic goggles (such as Daisy X7< /a>). Above the Velcro, “pipes” are formed from the fabric, through which the wires of optoelectronic devices are pulled.
At the back of the head, the Mil-Tek cover for a soldier's helmet is equipped with a pocket with a large lapel and a Velcro fastener. As a rule, it is used to place a NVD counterweight. Here, a soldier can store bulky personal items like a lighter. Standard velcro panels for ID are sewn over the pocket-patches.
Slots are made almost over the entire area of ​​​​the cover. During special operations, for which camouflage is important, twigs with leaves and other suitable material collected on the ground are inserted into them.