SOTx2 WB BC (3B) night sight with Weaver mount (Image Intensifier Generation 3)
Characteristics:
- High image quality aimed at professionals
- 2x magnification, F1 lens. 2.50mm
- Remote start button (included)
- Aiming mark "duplex" red color with an alignment step of 1/2 MOA.
- Manual brightness control
- Weaver rails on the body for attaching additional equipment
- Filled with dried nitrogen corepus
- Illumination for aiming mark
- Anti-reflective matte coating of all surfaces of the device.
- Moisture protection - immersion up to 1 m / 30 min
- Adjustable reticle brightness (1 button press)
- Battery CR123A
Technical parameters:
Magnification 2X
Image intensifier Generation 3
The sensitivity of St. 1900 uA/lm
Resolution 45-51 lines/mm
Lens F1.2, 50mm
Removal of the exit pupil, mm 40
18 degree field of view
Aiming mark "duplex" Red on green
Focusing limits from 1 m to infinity.
Vertical and horizontal alignment step 1/2MOA
Battery powered 40 h.
Limits of diopter adjustment, diopter +/-5
Dimensions 275x95x85 mm
Operating temperature range -40°C to +50°C
Moisture protection - immersion up to 1 m / 30 min
Weight 1 kg
The operation of the SOT X2 BC 3B night vision sight is based on the principle of electro-optical amplification of the light flux coming from or reflected from objects observed at low illumination levels.
electron-opticalThe sight system contains: lens, reticle, image intensifier tube, eyepiece. The lens gives an image of an object of low brightness, the electron-optical converter enhances the brightness of the image, while the eyepiece allows you to view the intensified image of the object with a grid image superimposed on it (duplex) on the image intensifier tube. Mesh illumination is provided by LED.
The device has a built-in manual brightness control system, which is very convenient for the operator, because. you can always set an individually acceptable level of glow.
Protection system OP from general illumination protects the image intensifier tube from burn-through and illumination, and the photocathode - from a decrease in sensitivity during a short-term inclusion of the COTX2 BC 3B sight in high illumination.
This scope uses high quality coated optics.
The sight has accurate and reliable adjustment mechanisms.
Capable of withstanding recoil energy from calibers up to 375 H&H (COT X line).
The sight can be operated under the influence of harsh external conditions - heavy precipitation, temperature fluctuations.
HighHigh resistance to adverse factors is ensured by: impact-resistant sealed construction, durable materials, rigorous testing (each sight undergoes several lengthy checks).
The "body" of the sight (line SOT X) is made of metal and filled with dry nitrogen. The peculiarity of the body is that it is MONOLITHIC, and this significantly increases the tightness and impact resistance.
Each item is subjected to rigorous factory acceptance tests (100 impacts on a shock stand at 5000 m/s2). Resource tests have shownthat the SOT X2 BC 3B sight retains its characteristics even after 2400 shots with the same acceleration!
(068) 300-5000
Optics 
