Leatherman SUPERTOOL 300 EOD-BLACK
The Leatherman Super Tool 300 is built for the hard work! The model is designed for tough and harsh use - work gloves can be left on. Reinforced handles and tool holders. Work calmly even with work gloves!
A tool for which any task is feasible
New pliers - the most powerful and strong. Now they are designed for even greater strength. New powerful cutting pliers, the plates of which can now be replaced if necessary. INAs a result, you can not spare your tool and use it to the maximum!
Steel cable cutters, electric ferrule crimping, four screwdrivers, an awl - all these additions make the Super Tool 300 multitool indispensable!
Removing and replacing blades is very easy. The blades are secured with Torx T8 screws. Thread lock must be applied to the screw. A repair kit of two blades (right and left), two screws and a T8 G-key is sold separately.
Also on the pliers (at the base on the side of the handles) there are Pliers for steel cables and a crimper that can be used to strip insulation from 
wires.
In work, the pliers showed their best side. When working with gloves, sometimes you forget that you have a multi-tool in your hand, and not Soviet scrap pliers. The box of the multi-tool, which forms the handles, is now rolled up - nothing crashes into the hand. The pliers are laid out quite easily and confidently fixed in the open position. The frame of the multitool at the base of the pliers workIt's like a spring, keeping the handles from folding. The ballisong effect is not observed - the multitool is moderately tightened on the axles. It is convenient to open the pliers with one hand, both by shaking, followed by fine-tuning, or simply with a brush.
The end tools are taken out separately (serrator, plane, saw and file). All averages are taken out in a package and the necessary tool is already pulled out of this package. In principle, if wearing gloves, then it is really very convenient. A very nice addition is the large rolled cutout in the multi-tool box from the side of the blades, for convenient and quick removal, and a wide groove on the blades themselves. Also, both blades are additionally fixed in the closed position, according to the principle of locks in liner locks.
Plain blade, serrated, saw and file made it as long as possible. The blades are very convenient to bring into position in gloves, even with one finger. The file is double-sided with a coarse cruciform notch and a smaller oblique cut. There is also a notch on one of the faces, andShe plays the role of a hacksaw for metal. And a file and a hacksaw for metal can handle ordinary rolled metal quite confidently. Hardened rods and self-tapping screws are also within their power.
Saw on wood. Quite competent execution of a small canvas. A tooth with a height of 2 mm and a step of 2 mm is directed to the handle, so the saw does not “jump” when moving away from itself, and when moving towards itself, the entire efficiency of the blade is used. The thickness of the saw along the butt is less than the thickness along the teeth, therefore jamming of the saw in the material is excluded.
Characteristics:
IfNumber of functions: 19
Blade material: stainless steel
Handle material: stainless steel
Blade length, mm: 81
Folded length, mm: 115
Weight, g: 272
Features: safety ring
Package contents: multitool, box, case
Tools: Needle nose pliers, Capsule crimp, Replaceable 154CM heavy duty cutters, Stranded wire cutters.
(068) 300-5000
