RPS ZSU (Shoulder Belt System) AD

RPS (shoulder-belt system) with MOLLE fixation system.

Construction:

RPS consists of two elements:

20 cm wide belt with MOLLE system cells for attaching pouches. Belt thickness - 10 mm. For uniform pressure, a 5 cm wide belt sling is sewn along the entire length of the belt.

Shoulder straps are attached to the waist.

Outer material: High strength 100% PES 600D.

Inner material: 3mm thick 3D mesh - wicks away moisture and prevents debate.

Color: pixel

Filler:

Inside the belt is a damper material that reinforces the carcass and allows you to use a sufficient amount of attachments without twisting and deforming the base of the belt. The shoulder straps also use a 4 mm thick layer of damping material to provide additional cushioning.

Fix:

The belt is fixed at the waist with a belt sling and fastex 5 cm wide. This belt sling has a one-piece design and is sewn from the inside along the entire length of the belt For its uniform pressing to the body. Adjustment to the desired size is carried out with the help of auxiliary double-slot buckles, which allow you to adjust the RPS in girth to a large side in the range of up to 50 cm. The shoulder straps are fastened to the belt. On the chest, the straps are not fixed to each other.

Cells for attaching pouches are reinforced. All horizontal slings for the MOLLE system are made by joining two layers of slings. With the help of this, the pouches sit in the cells more tightly, and the cells themselves do not stretch over time from a constant Downloads.